GPS Survey Equipment at Advanced Geodetic Survey

Seco GPS Accessories
back to product list next---->

	2.5-Meter GPS Carbon Fiber Rover Pole-Fixed Tip, Dual Grad. — 5129-50 Dual graduations, 2 mm and 0.01 ft. Collapses to 1.4 m, extends to 2.5 m. (2.3 lbs.) 2.5-Meter GPS Rover Pole - Fixed Tip, Metric Grad. — 5129-51 This pole features metric graduations. Locks at 1.8 m, 2 m and 2.2 m. Collapses to 1.4 m, extends to 2.5 m. (2.3 lbs) 3.5-meter GPS Rover Pole - Fixed Tip, Centimeter Grad. — 5129-71 Metric graduated pole, locks at every 20 cm mark starting at 1.8 m, extends to 3.5 m (11.5 ft). The graduations are cm. Weighs 3.3 lbs. 3.5-meter GPS Rover Pole - Fixed Tip, Dual Grad. — 5129-70 Dual graduations read height to top of graduated inner. It locks at every 20 cm mark starting at 1.8 m, extends to 3.5 m. The graduations are cm and 0.05 ft. 3.3 lbs. SECO telescoping poles are designed to give the GPS surveyor all the features needed in a single pole. They are ideal for kinematic surveys. They have a 0 H.T. (zero height, generic for all users.) The lightweight carbon fiber composite and aluminum construction make the poles 30% lighter than similar prism poles. Stainless steel locking pin engages in selected hole in the graduated inner to guarantee no slipping or change in length of the pole. The pole uses SECO’s TLV lock, which contains a 40-minute vial on the lock.
	10-minute Heads-Up™ Level — 5001-25 10-minute Vial for 1-1/4-inch Diameter Poles — 5080-052
	2.6-Meter Gold Kevlar® Telescopic Pole — 5129-53K 2.6-Meter Gold Kevlar® Telescopic Rod — 5129-51K Made of Kevlar®, the high-tech material that is known for its high tensile strength and low weight. Kevlar® tubes are non-conductive, which makes this rod ideal for surveying in areas where there may be a danger of low-hanging electrical wires. The SECO Gold Kevlar poles and rods are the same light weight as our popular carbon fiber products. All fittings are machine-anodized aluminum. The two-piece point has a removable hardened point
	2-Meter Aluminum 'GT' Snap-Lock Rover Rod — 5125-20-XXX-GT This rod features a new one-piece design. It’s faster and more user-friendly compared to traditional two-piece, screw-together rods. It’s an ideal rod for all GPS RTK surveys. Telescopes and locks at 2 meters and then collapses back to 1.354 meters. 2 locking systems: The snap lock, which guarantees no slipping and the compression lock, which centers the telescoping inner and maintains straightness. This new ‘GT’ model features a 10ths/100ths graduated outer (lower) pole. A standard, non-graduated model is also available (5125-20-XXX). 40-minute, adjustable circular vial and several color options. 2.3 lbs
	2-Meter Carbon Fiber Rover Rod — 5128-00 Featherweight carbon fiber composite that is ideal for GPS. The rod is a fixed height at two meters. The pole comes with an on-board 40-minute adjustable vial. It has a male 5/8-11 tip. Weighs 1.42 lbs
	2-Meter Carbon Fiber Snap-Lock Rover Rod — 5128-20 One-piece design. Faster and more user friendly (compared to traditional two-piece, screw-together rods). The rod telescopes and locks at 2 meters and collapses to 1.354 meters. 2 locking systems: snap lock which guarantees no slipping and compression lock centers the telescoping inner and maintains straightness. 40-minute adjustable circular vial. Carbon fiber is strong, dent resistant and has a 'zero' coefficient of expansion. A 'GT' model is also available with a graduated (10ths/100ths) outer pole, see your dealer for details. Weighs 1.60 lbs
	2-Meter GPS Rover Rod with Cable Management — 5125-06-FLY Popular SECO two-meter rover rod now has built-in cable management! Slots cut in the tube hold and hide the cables. The slots are 9/16 x 1-1/2 inches. The cables can be left in the pole for faster setups. 40-minute, yellow-fluid vial and a texturized vinyl hand grip as standard equipment. Weighs 2.85 lbs
	2-Meter, 2-Section Gold Kevlar® Rover Rod — 5128-00K The tubes in this 2-meter rod are made of Kevlar®, the high-tech material that is known for its high tensile strength and low weight. Kevlar® tubes are non-conductive, which makes this rod ideal for surveying in areas where there may be a danger of low-hanging electrical wires. The SECO Gold Kevlar poles and rods are the same light weight as our popular carbon fiber products. All fittings are machine-anodized aluminum. The two-piece point has a removable hardened point.
	40-minute Vial for 1-1/4-inch Diameter Poles — 5085-052
	8.5-Foot Gold Kevlar® Telescopic Pole — 5129-52K The tubes in this 8.5-foot, 135 mm ht rod are made of Kevlar®, the high-tech material that is known for its high tensile strength and low weight. 8.5-Foot Gold Kevlar® Telescopic Rod — 5129-50K The tubes in this 8.5-foot, 0 ht rod are made of Kevlar®, the high-tech material that is known for its high tensile strength and low weight. Kevlar® tubes are non-conductive, which makes this rod ideal for surveying in areas where there may be a danger of low-hanging electrical wires. The SECO Gold Kevlar poles and rods are the same light weight as our popular carbon fiber products. All fittings are machine-anodized aluminum. The two-piece point has a removable hardened point.
	Antenna Mast Assembly — 5561-20 The SECO Antenna Mast Assembly will fit most heavy-duty-type tripods after the bolt assembly has been removed. The mast telescopes to 7.5 ft (2.3 m) (plus your tripod height for maximum height). It’s easy to install, a hex tool is included. Convert your extra tripods to a radio base set-up! 2.5 lbs.
	ATV Pole Bracket System — 5198-50 Designed to hold a rover rod and a radio antenna pole (sold separately). The universal bracket system fits most ATVs, it attaches with U-Bolts to the luggage rack. The bracket’s tripod design makes a rigid framework that holds up to vibration and shock of ATV operation. The bracket holds all poles from 1-to-1.25 inch O.D. Quick clamp handles make loading and unloading the rover pole fast and secure. Fully adjustable; the slotted channels allow customization of all components to your particular set-up needs. A data collector/controller can connect to the handle bars and quickly transfer back to the pole with our new ball-and-socket 5199-Series bracket (sold separately). Comes with transport/storage bag. 24 lbs.
	Fixed Tip, Quick-Release GPS Rover Rods — 5125-01-YEL This 2-meter rod is configured to allow the quick and safe release of your GPS antenna. There’s no need to screw the antenna on and off, risking damage to the antenna. The quick-release adapter stays attached to the GPS antenna. The quick-release pin features an anti-rotation notch that prevents the antenna from rotating. The rod measures two meters and has a 40-minute circular vial, vinyl handgrip and replaceable steel point. 3 lbs.
	Fixed-Height GPS Antenna Tripod/Collapsible Center Staff — 5119-00-XXX Features a collapsible center staff with twist locking mechanism that rotates 360° to check calibration of plumbing with a 10-minute vial and quick release & twist locking mechanisms on the legs. It is dual graduated and adjusts to three heights: 2 m, 1.8 m, and 1.5 m. Collapses to 50 inches. Removable 5/8-11 adapter and an onboard compass. The extendable tripod legs and the pole are electrostatically powder painted and include replaceable points. Aluminum hardware is anodized black. 15 lbs.
	Fixed-Height GPS Antenna Tripod/Fixed-Height Center Staff — 5115-00-XXX Fixed-height, two-meter center staff that rotates 360° to check calibration of plumbing with a 10-minute vial, a removable 5/8-11 adapter and an onboard compass. The extendable tripod legs and the pole are electrostatically powder painted and include replaceable points. Aluminum hardware is anodized black. 15 lbs.
	GPS Compass for 1-1/4-inch Diameter Poles — 5125-050
	GPS or Radio Antenna Mast Bracket — 2133-10 Allows assembly of sections of standard diameter poles to obtain the desired height above ground of the GPS or radio antenna. Works with any standard 5/8-11 tripod and any pole sections 1- to 1.25-inch O.D. Easily plumbed over the point when needed for elevating a GPS antenna through the canopy. Six-to-seven meters height is stable when using 1.25-inch sections. For windy conditions or higher setups a plate for attaching guy wires can be used.
	GPS Quick-Disconnect Adapter — 5111-00 This adapter adds 76.22 mm to the pole length.
	GPS Quick-Release Adapter — 5187-00 Female 5/8-11 with quick release tip. Adds 23.8 mm to length of rod.
	GPS Quick-Release Adapter — 5187-01 Female 5/8-11 with quick release tip. It adds 23.8 mm to length of rod. Features an anti-rotational pad to prevent movement.
	GPS Quick-Release Tip — 5113-012 The 5113-012 Quick-Release Tip has male 5/8-11 threads.
	GPS Rover Rod — 5125-00-YEL This rover rod is the same as the #5125-01-YEL, except without the quick release tip.
	GPS Rover Rod Hard Shell Case — 8162-20-BLK Store your SECO Rover Rod in this hard shell case and rest assured that it's protected from weather and harsh consitions.
	GPS Rover Rod Wheel — 5125-053 Ideal for RTK profiling, this accessory keeps the rover rod on the surface you are measuring to. Convenient handle allows you to make sharp turns, track a straight line and to roll over obstacles. It maintains the same height as the pole point, ±2 mm.
	GPS Tie Down Kit — 5119-010-XXX Three SECO Tie Rods with twist clamps on the ends and a kit bag which will hold three SECO Tie Rods, three metal stakes up to 30 inches in length and a hammer (stakes and hammer not included). This kit will help secure a tripod in windy conditions!
	GPS Tripod Heads-Up™ Level — 5001-24 Features 10-minute vial and can easily be attached anywhere on a 1.5-inch diameter pole. Fits all SECO GPS Tripods. Allen Wrench included for quick installation. Set up at ‘eye level’ to make a comfortable and easy setup of the GPS Tripod.
	GPS Truck Door Bracket — 5114-20-XXX Holds a GPS pole to the door of your survey truck. Great for grade checking, TOPOs, estimating, RTK surveying and site preparation. The bracket is easy to put on and take off, it features a non-damaging mount. Utilizes a safety strap under tension to keep it on the door. The bracket fits most midsize to fullsize trucks and SUVs. The door opens and closes with the bracket attached to the door. Holds all GPS- and RTK-type poles. Brackets are available to hold controller inside the cab (5199-5X). 6.2 lbs.

Heavy-Duty GPS Antenna Tripods — (Three Models: 5119-10, -11, -12) 5119-XX-XXX
The 5119-10-XXX is similar to the popular SECO 5119-00-XXX, but stronger. This heavy-duty tripod features a 6-inch-diameter, round head which easily holds lasers or robots. Larger telescoping legs (1.25- to 1.50-inch diameters) feature adjustable handle bolts on the leg pivots which creates greater stability. And, no tools are needed to set the leg pivot tension!
The #5119-11-XXX has the same standard features as the #5119-10-XXX but includes precise adjusters to make centering the 10-minute vial easier. The adjusters provide fine leg extension, a range of ± 0.25-inch from the center line. It’s like having leveling screws for a tripod!
The #5119-12-XXX is identical to the #5119-11-XXX with the addition of double leg points (shown below). Dual points create more bite in the ground and minimize the chance for twisting. Double points are useful with angle measuring instruments such as robots.
All three models are suitable for GPS and machine-control applications. Approx. 20 lbs.

	Pole Case for Trimble Pathfinder® Series — 8143-21-YEL This case holds the Trimble Pathfinder® ProXH™ or the ProXT™ data collector securely to the survey pole. Attaches easily with a standard SECO clamp and a safety strap. Top and bottom of the case are open for easy antenna cabling access and control panel viewing.
	Radio Antenna Bracket — 2133-03 The open clamp attachment allows quick and easy connection to the pole. Will connect to 19- and 32-mm diameter poles. The brass male 5/8-11 captive stud is easily removed for direct attachment of the radio antenna to the bar. The bracket comes with a non-slip Velcro Cable Strap (#8124-012) to help manage the radio cable. Can be used with the SECO Radio Antenna Adapter (#2133-00) which adapts 1-1/8-18 radio antennas to any 5/8-11 threaded tip.
	Radio Antenna Bracket for Tripod — 2133-05 Holds a radio antenna securely to an instrument tripod leg. The heavy-duty ball-and-socket bracket makes plumbing the antenna easy. This bracket fits all SECO and other manufacturer’s full-size and heavy-duty tripods. Uses a half-inch-long 5/8-11 male stud to secure the antenna or extension. The bracket clamps easily between the dowels of the instrument tripod leg. Can be used with the SECO Six-Foot Snap Lock Radio Antenna Pole (5139-02-XXX) or any extension with a male/female 5/8-11 connection
	Single Mag Mount—5/8-11 tip — 5114-050 5/8-11 tip, 3.5-inch diameter.
	Single Mag Mount—Anti-Rotation Tip — 5114-051 This mag mount features a quick-release anti-rotation tip, 3.5-inch diameter.
	Switchable Kelly Mag — 5114-052 The Switchable Kelly Mag is designed with a v-shaped base to allow it to hold on to pipes. Flip the switch and the inside magnet turns and releases its hold on metal surfaces.
	Triple Mag Mount — 5114-01 Used for mounting a GPS antenna onto a vehicle. The new mag mount features a sleeker, more modern design and the stainless steel material makes it lighter. New spring design - more flex to the magnets - works better on curved surfaces. Includes quick release adapter (#5111-00) to allow quicker attachment of the GPS antenna.
	Tripod With Antenna Mast — 5300-11 The mast telescopes to 7.5 ft and the tripod itself can be set to 5.5 ft. for a total elevation of 13 ft. The mast is aluminum with a 5/8 x 11 threaded tip. The tripod is the SECO #5302-10-ORG The antenna mast can be purchased separately to convert your existing heavy-duty tripod! Ask for the #5561-20 at your favorite SECO dealer.
	Two-Meter Height Pin — 7751-50 The #7751-50—with its 1 mm accuracy—is ideal for accurately measuring GPS antenna heights. It's dual graduated in millimeters and hundredths of a foot. The Height Pin is six feet long and only 16.5 inches when collapsed as shown. It's constructed of black anodized aluminum and features a stainless steel point. The shock cord design affords quick setup and breakdown.

23111 F.M. 1462 Damon, TX 77430 877-755-4680 Fax: 979-553-3756