 |
25 mm L-Bar Mini Prism 6600-02
Perfect for deformation or mining surveys, or in places where a fixed mounting is required. The "L-Bar" and prism housing is constructed of anodized aluminum. Permanently bonded to the holder, making it water and dust resistant. Features a -25-mm offset. |
|
25 mm Prism 6020-01
Copper-coated 25-mm prism in a canister. |
 |
25 mm Prism System/-30 mm Offset 6200-00-XXX
25 mm Prism System/-34 mm Offset 6200-04-XXXIncludes a complete tilting Mini Prism Assembly (#6251-00-XXX), Point (#6220-00), Bob Prism Mount (#6030-00), and padded nylon Cordura Belt Case (#8022-00-ORG). |
 |
25 mm Stakeout Prism Assembly/-30 mm Offset 6405-01-XXX
25 mm Stakeout Prism Assembly/-34 mm Offset 6405-04-XXXThis 25-mm copper-coated prism features aluminum double yoke construction with a tilting coaxial target. There are on-board 130-minute vials, top & bottom. It includes replaceable plumb bob point. Height to center of prism w/plumb bob point: 100 mm.
Comes with case #8024-00-ORG. |
 |
25 mm Tilting Prism Assembly / -30 mm 6251-00-XXX
Has an adjustable offset of 0, -30 mm.
25 mm Tilting Prism Assembly / -34 mm 6251-04-XXX
Has an adjustable offset of 0, -34 mm.
The one-inch (25-mm) mini prism is attached to a tilting mount with an on-board 130-minute vial.The mount threads onto a 5/8 x 11 mounting stud or may be used with removable point to hold on a stake or hub. Height from base of prism to center of glass: 0.23 ft (70 mm). |
 |
62 mm Blinking Strobe Prism 6416-00-BLK
Here's a prism solution that's ideal for night time or any low-light job condition. Features a strobing LED light. (strobes every 2 seconds). All electronics and the battery are securely built in to the canister. The battery a Sanyo CR-1/3N is the same used in many cameras and will function for approximately 48 hours before needing replacement. The sealed prism canister features an M20 thread, which is standard for screw-in style canisters and fits all holders designed for screw-in style prisms. |
 |
Bob Prism Mount 6030-00
|
|
Eclipse Prism Assembly / -34 mm Offset 6407-00
|
 |
Eclipse Prism Assembly, 62 mm 6400-00
Features a 62-mm hermetically sealed, water-resistant, nitrogen-filled prism canister. Can be set at a -40-mm true nodal point constant which offers optimal angle measurements, even when tilting the prism in either the horizontal or vertical axis.
Unlike most tilting prisms, the optical center of the prism stays on point. The tilting prism holder, canister and target are constructed of DuPont Zytel. Includes a reversible, two-color target (black & white/black & yellow) and a peep sight collimator. A -30 mm adapter included. Height from base of prism to center of glass: 38 ft (115 mm). |
|
Mini Bob Prism 6100-00
Use the mini bob prism with a Gammon Reel for speed and convenience.
The mini bob prism has an adjustable offset of 0, -30 mm. |
 | Mini Prism System 6450-00-BLK
A miniature version of the Eclipse Total Prism System, the mini system includes the Mini Tilting Prism (#6451-00-BLK), a plumb bob attachment, Mini Bob Prism Mount (#6453-00), Point (#6220-00), & Belt Case (#8022-00-ORG) with a convenient belt loop. |
 |
Mini Stakeout Prism with Site Cones 6405-10
Features site cones on either side of the assembly and an adjustable side-mounted circular vial. The site cones double as tilting-axis lock knobs. The adjustable 40-min vial is mounted on the front side and is easy to see and adjust. The prism can be set in 0 and -30 mm offset positions. Measures 100 mm from plumb bob point to tilting axis or 150 mm from 5903-00 heavy-duty point (sold separately).
The prism can be handheld or pole-mounted at the top or bottom. A belt case is included. Order 6405-14-XXX for -34 mm version. |
 |
Mini Tilting Prism Assembly 6451-00-BLK
This prism assembly includes a 25 mm copper-coated mini prism (#6020-01) and targeted 0, -30 tilting holder with an on-board 40-minute vial. The target and mount is black. Height from base of prism to center of glass: 0.23 ft (70 mm) |
 |
Mini-Stakeout Prism Kit 6405-11
The white site cones on X and Y axis help improve centering of your instrument crosshairs for vertical and horizontal pointing. The horizontal site cones double as tilting axis locks. The heavy-duty white point can handle the abuse of being on the bottom of the pole and can be used for hand held applications as well.
The white adapter is used to make the prism height 115 mm for use with most standard prism poles. An adjustable 40-minute circular vial is mounted at center and to the front for easy viewing. It can be used in four height configurations: 50 mm, 100 mm, 115 mm and 150 mm, top or bottom of the pole, handheld, or tribrach mounted.
The 25-mm copper-coated prism is moisture-resistant and has good range; 3000-to-4000 ft is common with most instruments. This kit features Zero or 30-mm prism offset positions. Comes with a padded carrying case. |
 |
Point 6220-00
|
|
Premier Prism Holder with Target / 0, -30 mm 6403-00
|
|
Prism Holder, -30 mm, -40 mm Offset 6410-00
|
|
Prism In a Canister, Nitrogen-Filled, 62 mm 6411-00
|
 |
Prism Prism Assembly, 5.5 x 7 in Target, 62 mm 6422-02-XXX
The Premier Prism Assembly features a copper-coated canister type prism. It is waterproof, and has a M20 universal mounting thread. The tilting holder is anodized aluminum and features an improved locking clamp screw design and an 18-gauge steel target. The prism can be mounted in either 0 or -30 mm offset positions. The tilting axis height is 115 mm.
 |
 |
Prism Prism Assembly, 6 x 9 in Target, 62 mm 6402-02-XXX
The Premier Prism Assembly features a copper-coated canister type prism. It is waterproof, and has a M20 universal mounting thread. The tilting holder is anodized aluminum and features an improved locking clamp screw design and an 18-gauge steel target. The prism can be mounted in either 0 or -30 mm offset positions. The tilting axis height is 115 mm.
 |
|
Prism, Copper-Coated, Stainless Steel Stud 6411-02-BLK
|
|
Prism, Copper-Coated, Stainless Steel Stud 6411-01-BLK
|
 |
Single Prism Assembly 6300-00
This assembly features a 2-7/8-inch (73 mm) precision ground glass prism sealed in a Lexan canister. The prism is mounted in a heavy-duty aluminum holder. Height from base of prism to center of glass: 0.21 ft (64 mm). Prism offset is -30 mm. Sight pole included. Target (shown) is sold separately. |
 |
Single Prism Tilting Assembly 6440-00-XXX
This -30 mm offset prism holder is constructed from durable aluminum and sealed with a rugged corrosion-proof electrostatic powder paint coating. Includes copper-coated (#6411-02-BLK) prism. |
 |
Standard Prism Assembly, 5.5 x 7 in Target, 62 mm 6402-10-XXX
Features a copper-coated canister type prism. Waterproof and a M20 universal mounting thread. The tilting holder is powder-painted die cast aluminum. It uses a simple but proven locking system. The prism can be mounted in either 0 or -30 mm offset positions. The tilting axis height is 115 mm.
 |
 |
Tilting Single Prism Holder 6375-00-XXX
The prism holder is constructed from durable aluminum with a rugged, corrosion-proof electrostatic powder paint coating. The holder will accept screw-in prisms and has zero and -30 mm offsets. Height from base of prism to center of glass: 0.38 ft (115 mm). |
 |
Tilting Triple Prism Assembly 6341-00
Orange polycarbonate with metal inserts and an aluminum yoke. Holds one or three prisms, compatible with most screw-in prisms and has a 0, -30 prism offset. It has a peep sight for pointing the holder. The H.T. is 97 mm. Comes with three 62-mm prisms. 2.7 lbs. |
|
Tilting Triple Prism Holder 6341-10
|
|
Tilting Triple Prism Target 6341-11
|
|
Zero Offset Adapter for Eclipse Prism Assembly 6410-018
The Zero Offset Adapter is used with the Eclipse Prism Assembly (#6400-00)
|
